2021 Ram Promaster 2WD

2021 Ram Promaster 1500 with 13k miles. High Roof, 136″ wheel base.

• Operable driver’s side middle window.
• Fixed OEM passenger’s side middle window.
• Rear back-up camera w/ monitor.
• FWD
• 14MPG city, 18 HWY
• Drives more like an SUV/truck than a cargo van. 41′ turning radius
• 5,100 lb towing capacity
• 280 Horsepower at 6400 rpm
• 260 Torque at 6400 rpm
• Bluetooth enabled, with stereo
• Roof Rack and ladder

With finished material on walls, the bed can be 6′ long sideways in van, allowing for much more space for other amenities

Was purchased to do a camper conversion and later decided to forego vanlife. It has been insulated and subfloor is installed. $2,700 of materials have been installed + top of the line maxxair fan ($325), new.

Both seats have scopema swivels installed ($400/each).

Floor has 1/2″ Foamular polystyrene pink board (R-3) with kilmat in the low ridges with 1/2″ maple 3-ply plywood with spray foam at edges. All adhesives were suggested by a professional van conversion company.

Ceiling has kilmat in all ridges and Sika polyiso 1″ board (R-6) with spray foam at ridges in addition to the kilmat. About 80% of thje exterior is covered in kilmat (4 boxes of 60 SF each, so 240 SF applied). Hardwood cut at angles has been installed with high strength marine adhesive and thru-bolts in order to install ceiling panels to allow for 1 6′ person to stand in the van. It makes the ceiling flush with the van frame/ribs.

Kilmat: Wheel wells fully covered with kilmat. Even the nooks and crannies have kilmat.

The rest of the van, including the doors and above cab is insulated with 3M thinsulate SM600L. Most areas have two layers, giving it an R-value of 10.4 (1 layer is R-5.2 and ~1.5″ thick). The only locations not insulated are the rear door window panels and the furthest rear side window panels in case a buyer wants to add windows. More thinsulate and polyiso come with the purchase to complete the insulation.