2021 Mercedes Sprinter 4×4

Camper Van: 2021 Mercedes Sprinter 2500 170inch Wheelbase 4×4 Pebble Gray (light brown color) 17,400 miles

This awesome camper was purchased at (~4,000 miles) from the original owner who was also the guy who completed the build out. It has served our family of five (two littles and a large golden retriever) well on many camping trips and long road trips, but we are looking to free up some money for farm projects (mainly a tractor). I will list all the main build out amenities below and will provide a detailed video tour for serious inquiries on request. The van is in great shape and all maintenance has been documented and completed on time. Minor cosmetic damage on the driver side plastic panel/ladder(see detailed images) from brushing a metal pole at a gas station on a road trip.

Interior:  

1. Both front captain seats are on swivels
2. The rear seating bench is compatible for two car seats (one of the big points for our family) and can be removed pretty easily if so desired (heavy duty spring loaded attached to the bracket on the frame).
3. Dometic Fridge/Freezer on roll-out shelf
4. Water System (two 7 gallon containers under the sink/one fresh water and one waste water). Sink is a USB Dometic Go water faucet.
5. I really like this water system as you always know exactly how much water you have and don’t have to worry about winterizing anything.
6. Espar Heater (gets super warm and runs off the diesel fuel tank)
7. Light controls for front and back of the cabin (with separate controls for reading lights in the top bunk and bottom bunk)
8. Queen memory foam mattress on the top bunk.
9. Large Bottom Bunk (storage or secondary sleeping area. This is where our kiddos slept on road trips).
10. Induction Stovetop (iSiler)
11. Storage (custom wood cabinets with gas struts) and Elastic storage nets in various locations.
12. Chopping block counter sealed with beeswax.
13. Sink with chopping block cover
14. Magnetic blackout/insulation covers custom fitted for all interior windows and sliding curtains for the front window/driver cab area

Exterior:

1. Flatline Van Co Roof Rack and ladder
2. Yakima Solar Road Shower (mounted on roof 7gallon model)
3. Two Maxx Air Fans (mounted on the roof front and back)
4. Shore Power Connection (15 amp shore power)

Van Details:

1. 3.0-Liter V6 Turbodiesel Engine (V6)
2. Horsepower: 188 hp @ 3,800 rpm
3. Torque: 325 lb-ft @ 1,400–2,400 rpm
4. Transmission: 7-speed automatic (7G-TRONIC Plus)
5. Drivetrain: 4WD (High and Low)
6. Capabilities: Towing capacity is up to 7,500 lbs, and payload ranges up to 7,429 lbs depending on the build

Tires/Rims

1. Rims: Black Rhino Stadium Rotary Forged
2. Tires: BFG (KO2) LT265/75R16 Load Range E

Solar Panels/Electrical

1. Three 100W panels (Renogy)=300W total solar

 Battery Bank (Power Storage)

2× Renogy 12V 200Ah AGM Deep Cycle Batteries:

1. Capacity: Connected in parallel to maintain a 12V DC system while doubling the capacity to 400Ah total (approx. 4.8 kWh gross capacity, ~2.4 kWh usable at a 50% max depth of discharge typical for AGM batteries).
2. Securing: Strapped together with heavy-duty tie-down straps anchored to the vehicle frame.
3. Renogy Rover MPPT Solar Charge Controller (Far Left):
4. Controls power coming from rooftop solar panels and steps down high solar panel voltage to safely charge the 12V AGM battery bank.
5. Renogy 40A DC-DC Battery Charger (Middle-Left):
6. Connects the van’s main engine alternator to the house battery bank.
7. Ensures the house batteries charge while driving without overloading or draining the vehicle’s starter battery.

Inverter (AC Power Supply)

1. Renogy 2000W Pure Sine Wave Inverter (12VDC to 110VAC):
2. Converts 12V DC battery power into standard 110V/120V AC household electricity.
3. Capable of powering 120V appliances (laptops, induction cooktops, small microwaves, fridge, power tools).

 DC Power Distribution & Circuit Protection

1. Blade Fuse Block with LED Indicators (Center Upper):
2. Distributes 12V DC power directly to individual low-voltage loads (e.g., LED lights, USB outlets, water pump, diesel heater, vent fan).
3. Main Battery Disconnect Switch (Red Rotary Knob, Center):
4. Allows manual shutoff of the main positive feed from the battery bank for safety during maintenance or storage.
5. Inline ANL/MIDI Fuses & Circuit Breakers:
6. Thermal Circuit Breakers (Manual Reset): Located inline between the chargers (DC-DC / MPPT) and the battery to protect low-gauge wiring from overcurrent.
7. High-Amp Fuse Block (Near Inverter/Batteries): Protects high-current lines leading to the 2000W inverter.
8. Busbars & Common Grounding (Lower-Center):
9. Positive Busbar: Consolidates positive feeds from chargers to the main distribution